WAHL REPLACEMENT BLADE FOR – CORDLESS DETAILER

Description

Product Details

WAHL Replacement Blade for Cordless Detailer

WAHL Cordless Detailer Replacement Blade is a professional extra-wide T-shaped blade designed to restore close, precise cutting performance to compatible WAHL Cordless Detailer Li trimmers. The extended blade width provides excellent visibility and coverage for outlining, edging and detailed finishing work.

The blade provides a close cutting length of approximately 0.4mm and can be adjusted for zero-overlap performance by a suitably trained professional. Its precision-ground teeth support clean lines, sharp detailing and controlled close trimming.

Ideal for professional barbers, hairdressers and experienced grooming specialists, this replacement blade offers a practical solution when the original Cordless Detailer blade becomes worn, damaged or less effective.

Cutting Length

• Approximately 0.4mm.
• Zero-overlap capable when correctly adjusted by a trained professional.

Compatible Model

• WAHL 5 Star Cordless Detailer Li – compatible standard versions.

Extra-Wide T-Blade

The extra-wide T-shaped design offers an extended cutting area for efficient outlining and finishing. The projecting corners of the blade provide enhanced visibility and control when working around the ears, hairline, neckline, beard and moustache.

Close Precision Cutting

With an approximate 0.4mm cutting length, the blade is designed for close professional detail work. It helps create clean outlines, crisp edges and refined finishing results when used with a light, controlled technique.

Zero-Overlap Capability

The blade can be adjusted for zero-overlap performance by an experienced professional. Correct alignment is essential because the moving cutter must never extend beyond the stationary blade. Incorrect adjustment may cause skin irritation, cuts or injury.

Key Features

• Genuine WAHL professional replacement trimmer blade.
• Designed for compatible standard WAHL Cordless Detailer Li trimmers.
• Extra-wide T-shaped blade design.
• Provides an approximate cutting length of 0.4mm.
• Zero-overlap capable when professionally adjusted.
• Precision-ground teeth support sharp and accurate cutting.
• Extended width provides excellent visibility and coverage.
• Ideal for outlining, edging and detailed finishing.
• Helps restore smooth and consistent trimmer performance.
• Designed for professional barbering and hairdressing use.

Benefits

• Helps restore the original performance of a compatible Cordless Detailer.
• Supports crisp lines and precise detailing.
• Extra-wide design covers larger areas efficiently.
• T-shaped corners provide control around difficult areas.
• Close cutting length is ideal for professional finishing.
• Zero-overlap capability supports advanced detailing techniques.
• Provides a practical replacement for a worn or damaged blade.
• Regular cleaning and oiling can help preserve cutting performance.

Specifications

• Brand: WAHL.
• Product: Cordless Detailer Replacement Blade.
• Product Type: Professional Replacement Trimmer Blade.
• Blade Reference: 2215-series extra-wide T-blade.
• Blade Style: Extra-Wide T-Blade.
• Cutting Length: Approximately 0.4mm.
• Zero-Overlap Capability: Yes, when correctly aligned.
• Application: Outlining, edging, detailing and close finishing.
• Compatibility: Selected standard WAHL 5 Star Cordless Detailer Li models.
• Suitable for professional salon, barbering and training use.

What Is Included

• 1 x WAHL Cordless Detailer replacement blade set.

Ideal For

• Professional barbers.
• Hairdressers and stylists.
• Experienced barbering students.
• Professional grooming specialists.
• Crisp outlining and edging.
• Cleaning necklines and hairlines.
• Detailing around the ears and sideburns.
• Beard and moustache shaping.
• Replacing a worn or damaged Cordless Detailer blade.
• Maintaining compatible WAHL Cordless Detailer Li trimmers.

Why Choose WAHL Cordless Detailer Replacement Blade?

• Genuine professional replacement component from WAHL.
• Designed for compatible Cordless Detailer Li trimmers.
• Extra-wide T-blade provides visibility and cutting coverage.
• Close 0.4mm cutting length supports precise finishing.
• Zero-overlap capable for advanced professional techniques.
• Precision ground to support sharpness and durability.
• Helps restore smooth and reliable trimming performance.
• Ideal for busy barbershops, salons and training environments.

Fitting Instructions

1. Confirm that the replacement blade is compatible with the complete model and type numbers printed on the trimmer.
2. Switch off and disconnect the trimmer from the charger or mains adaptor.
3. Follow the blade replacement instructions supplied with the trimmer and replacement blade.
4. Use the appropriate tool to loosen and remove the blade mounting screws.
5. Carefully remove the existing blade components, noting their position and orientation.
6. Brush loose hair and debris from the blade mounting area.
7. Position the replacement blade correctly and refit the mounting screws loosely.
8. Align the moving cutter and stationary blade according to WAHL's instructions.
9. Ensure the moving cutter does not extend beyond the front or side edges of the stationary blade.
10. Check that the blade is straight and evenly positioned before tightening the screws securely.
11. Apply a few drops of WAHL blade oil across the cutting teeth.
12. Operate the trimmer briefly and check for smooth movement, unusual noise, pulling or excessive vibration.

Zero-Overlap Adjustment

1. Only attempt zero-overlap adjustment if trained and confident in professional blade alignment.
2. Switch off and disconnect the trimmer before repositioning the blade.
3. Loosen the blade screws sufficiently to allow careful adjustment.
4. Move the stationary blade towards the moving cutter while maintaining straight side-to-side alignment.
5. Keep the moving cutter fractionally behind the stationary blade across its complete width.
6. Tighten the screws and inspect the alignment from the front and both sides.
7. Test the trimmer carefully before applying the blade to a client's skin.

Cleaning and Maintenance

• Brush loose hair from the blade after each use.
• Clean and disinfect the blade between clients using a suitable professional blade hygiene product.
• Allow the blade to dry before applying lubricant.
• Apply WAHL blade oil before use, after cleaning and at regular intervals.
• Operate the trimmer briefly to distribute the oil, then wipe away any excess.
• Check the blade alignment and mounting screws regularly.
• Do not use the blade if teeth are bent, chipped, broken or corroded.
• Store the trimmer and blade in a clean, dry location.

Safety Information

• For professional use by trained or experienced operators.
• Confirm compatibility before purchasing or installing the blade.
• Switch off and disconnect the trimmer before blade removal, fitting or adjustment.
• Handle the cutting teeth carefully, as the blade edges are sharp.
• Ensure the blade is correctly aligned before operating the trimmer.
• Never allow the moving cutter to extend beyond the stationary blade.
• Incorrect zero-overlap adjustment may cause cuts, irritation or injury.
• Do not use the blade over spots, moles, broken skin or irritated areas.
• Avoid applying excessive pressure during close detailing.
• Do not use a blade with missing, chipped, bent or damaged teeth.
• Stop using the trimmer if the blade pulls hair, becomes excessively hot or causes discomfort.
• Keep the blade and mounting components out of reach of children.

Please Note: Compatibility may vary between standard, Gold, corded, cordless, regional and updated Detailer models. This blade is intended for compatible standard WAHL Cordless Detailer Li trimmers and may not be the correct blade for the Gold Cordless Detailer Li or corded Detailer. Always compare the original blade reference, coating, mounting system and complete appliance model number before ordering.

Top Tip: Use the corners of the extra-wide T-blade for controlled detailing around curved areas, then use the full blade width for straight necklines and larger sections. Apply light pressure and check the blade temperature regularly during close professional work.