WAHL REPLACEMENT BLADE FOR – BALDING / BALDFADER

Description

Product Details

WAHL Replacement Blade for Balding / Baldfader

WAHL Replacement Balding Blade is a professional ultra-close clipper blade designed to restore precise cutting performance to compatible WAHL Balding and Baldfader clippers. Its fine-tooth design provides an extremely short cutting length for close balding, skin fades, clipper-over-skin work and crisp outlining.

The blade cuts to approximately 0.4mm, making it suitable for professional services requiring a very close finish. Precision-ground teeth help deliver clean, controlled results when the blade is correctly installed, aligned, lubricated and maintained.

Ideal for professional barbers, hairdressers and experienced clipper users, this replacement blade provides a practical solution when the original blade becomes worn, damaged or less effective.

Cutting Length

• Approximately 0.4mm.

Compatible Models

• WAHL 5 Star Balding Clipper – compatible versions.
• WAHL Baldfader / Baldfader Plus Clipper – compatible versions using the corresponding blade system.

Ultra-Close Balding Blade

The fine-tooth blade is designed to cut hair extremely close, helping create clean bald styles and close clipper finishes. Its approximately 0.4mm cutting length is suitable for removing very short hair before finishing with a professional foil shaver where an even closer result is required.

Precision-Ground Teeth

The cutting teeth are precision ground to support sharpness, durability and consistent professional performance. Correct blade alignment and regular lubrication are essential for maintaining smooth cutting and reducing unnecessary friction.

Fixed Cutting Length

Unlike an adjustable taper blade, the Balding blade is designed to provide a fixed ultra-close cutting length. This makes it particularly suitable for balding work, close fades and finishing areas where a short, consistent result is required.

Key Features

• Genuine WAHL professional replacement clipper blade.
• Model 2105-style 6X0 Balding blade.
• Designed for compatible WAHL Balding and Baldfader clippers.
• Provides an ultra-close cutting length of approximately 0.4mm.
• Fine-tooth blade design.
• Precision-ground teeth support sharp and controlled cutting.
• Ideal for balding, close fades and crisp outlining.
• Helps restore smooth and consistent clipper performance.
• Suitable for professional barbering and hairdressing use.
• Designed for experienced professional clipper users.

Benefits

• Provides an ultra-close professional clipper finish.
• Helps restore the performance of a compatible WAHL clipper.
• Suitable for bald styles and close skin fades.
• Helps create clean outlines and precise finishing details.
• Fixed cutting length supports consistent results.
• Provides a practical replacement for a worn or damaged blade.
• Precision-ground construction supports reliable cutting.
• Regular cleaning and oiling can help preserve blade performance.

Specifications

• Brand: WAHL.
• Product: Replacement Balding Blade.
• Product Type: Professional Replacement Clipper Blade.
• Blade Reference: 2105-style Balding blade.
• Blade Type: 6X0 ultra-close fine-tooth blade.
• Cutting Length: Approximately 0.4mm.
• Adjustment: Fixed cutting length.
• Application: Balding, close fading, outlining and finishing.
• Compatibility: Selected WAHL Balding and Baldfader models.
• Suitable for professional salon, barbering and training use.

What Is Included

• 1 x WAHL professional replacement Balding blade set.
• Blade mounting screws.
• Clipper blade oil.

Ideal For

• Professional barbers.
• Hairdressers and stylists.
• Experienced barbering students.
• Professional grooming specialists.
• Ultra-close clipper cuts.
• Bald and buzz-cut styles.
• Close skin fades.
• Outlining and precise finishing.
• Replacing worn or damaged Balding clipper blades.
• Maintaining compatible WAHL Balding and Baldfader clippers.

Why Choose WAHL Replacement Balding Blade?

• Genuine professional replacement component from WAHL.
• Designed for ultra-close professional cutting.
• Provides an approximately 0.4mm finished length.
• Fine-tooth design supports precise balding and fading.
• Precision ground to support sharpness and durability.
• Helps restore smooth and reliable clipper performance.
• Ideal for professional barbers specialising in close cuts.
• Essential maintenance component for compatible equipment.

Fitting Instructions

1. Confirm that the replacement blade is compatible with the complete model and type numbers printed on the clipper.
2. Switch off and disconnect the clipper from the mains or power supply.
3. Follow the blade replacement instructions supplied with the clipper and blade.
4. Use the appropriate tool to loosen and remove the blade mounting screws.
5. Carefully remove the existing blade components, noting their correct position and orientation.
6. Brush loose hair and debris from the blade mounting area.
7. Position the replacement blade correctly and refit the mounting screws loosely.
8. Align the moving cutter and stationary blade according to WAHL's instructions.
9. Ensure the moving cutter does not extend beyond the front or side edges of the stationary blade.
10. Check that the blade is straight and evenly positioned before tightening the screws securely.
11. Apply a few drops of WAHL blade oil across the cutting teeth.
12. Operate the clipper briefly and check for smooth movement, unusual noise, pulling or excessive vibration.

Blade Alignment

Correct alignment is essential because this blade cuts extremely close to the skin. The moving cutter must remain slightly behind the stationary blade and must not project beyond its front or side edges.

If the blade cannot be aligned correctly, or if the clipper becomes noisy after installation, stop using the appliance and have it inspected by WAHL or a suitably qualified clipper technician.

Cleaning and Maintenance

• Brush loose hair from the blade after each use.
• Clean and disinfect the blade between clients using a suitable professional blade hygiene product.
• Allow the blade to dry before applying lubricant.
• Apply WAHL blade oil before use, after cleaning and at regular intervals.
• Operate the clipper briefly to distribute the oil, then wipe away any excess.
• Check the blade alignment and mounting screws regularly.
• Do not use the blade if teeth are bent, chipped, broken or corroded.
• Store the clipper and blade in a clean, dry location.

Safety Information

• For professional use by trained or experienced operators.
• Confirm compatibility before purchasing or installing the blade.
• Disconnect the clipper from its power supply before blade removal, fitting or adjustment.
• Handle the cutting teeth carefully, as the blade edges are sharp.
• Ensure the blade is correctly aligned before operating the clipper.
• Never allow the moving cutter to extend beyond the stationary blade.
• Do not use the blade over spots, moles, broken skin, irritation or raised areas.
• Avoid applying excessive pressure during close cutting.
• Do not use a blade with missing, chipped, bent or damaged teeth.
• Test the clipper carefully after installation and before using it on a client.
• Stop using the appliance if the blade pulls hair, becomes excessively hot or causes discomfort.
• Installation should be completed by a competent person familiar with clipper blade alignment.
• Keep the blade, oil and mounting components out of reach of children.

Please Note: Compatibility may vary between regional, discontinued and updated versions of the WAHL Balding and Baldfader clippers. The WAHL 2105 blade is specifically associated with compatible 5 Star Balding Clippers. Always compare the original blade reference, mounting system and complete appliance model number before ordering for a Baldfader or Baldfader Plus.

Top Tip: Allow the blade to do the cutting without applying heavy pressure. For maximum comfort during ultra-close work, use light controlled strokes, check the blade temperature regularly and apply WAHL blade oil throughout extended professional services.