WAHL REPLACEMENT LEAD FOR CORDED CLIPPERS – 3 METERS

Description

Product Details

WAHL Replacement Lead for Corded Clippers – 3 Metres

WAHL Replacement Clipper Lead is a mains power cable designed to replace a damaged or worn lead on compatible WAHL corded hair clippers. Its approximately 3-metre length provides the freedom of movement required around a professional barbering or hairdressing workstation.

The lead is intended for selected corded WAHL clippers using the corresponding internal cable connection and strain-relief system. Replacing a damaged lead can help restore a safe, reliable mains connection when the work is completed correctly by a suitably qualified electrical or appliance service technician.

Ideal for professional clipper repair and maintenance, the WAHL replacement lead provides a genuine spare component for compatible equipment. It is not a detachable charger or adaptor and requires the clipper housing to be opened for installation.

Length Available

• Approximately 3 metres.

Designed for Corded Clippers

The replacement lead is designed for compatible mains-powered WAHL clippers. It supplies continuous electrical power to the clipper and replaces the existing internally connected cable when that cable becomes damaged, worn or unreliable.

Professional 3-Metre Length

The approximately 3-metre cable length provides convenient reach around a professional workstation. This allows the operator to move around the client while keeping the clipper connected to a suitably positioned mains outlet.

Replacement Electrical Component

This product is an internal electrical spare part and is not intended to be fitted in the same way as a detachable charging cable. Installation requires the clipper housing to be opened and the lead to be connected securely using the correct terminals, strain relief and cable routing.

Key Features

• Genuine WAHL replacement power lead.
• Designed for compatible WAHL corded clippers.
• Approximately 3 metres in length.
• Provides practical reach around a professional workstation.
• Replaces a damaged or worn clipper cable.
• Designed for an internal mains connection.
• Suitable for professional clipper repair and maintenance.
• Helps restore a reliable power connection when correctly installed.
• Suitable for selected professional WAHL clipper models.
• Installation by a qualified technician is strongly recommended.

Benefits

• Provides a genuine replacement for a damaged clipper lead.
• Long cable supports freedom of movement during haircuts.
• Helps return compatible corded clippers to working condition.
• Useful for maintaining essential professional equipment.
• May extend the useful service life of a compatible clipper.
• Suitable for professional salons and barbershops.
• Provides an alternative to replacing the complete appliance where a lead repair is appropriate.
• Designed to fit the corresponding WAHL cable entry and internal connection system.

Specifications

• Brand: WAHL.
• Product: Replacement Lead for Corded Clippers.
• Product Type: Internal Mains Power Lead.
• Part Number: 01646-801.
• Length: Approximately 3 metres.
• Application: Repair of compatible corded WAHL clippers.
• Installation: Internal electrical connection.
• Compatibility: Selected WAHL mains-powered clipper models.
• Suitable for professional equipment repair and maintenance.

What Is Included

• 1 x WAHL replacement power lead – approximately 3 metres.

Ideal For

• Qualified appliance repair technicians.
• Authorised clipper service professionals.
• Professional barbering equipment maintenance.
• Professional hairdressing equipment maintenance.
• Replacing a split, frayed or damaged clipper cable.
• Replacing a lead with an unreliable internal connection.
• Maintaining compatible WAHL corded clippers.
• Salons, barbershops and training environments.

Why Choose WAHL Replacement Clipper Lead?

• Genuine replacement component from WAHL.
• Designed for compatible corded WAHL clippers.
• Approximately 3-metre length provides professional working reach.
• Helps restore a reliable mains connection when correctly fitted.
• Suitable for professional equipment repair.
• Practical replacement for a worn or damaged cable.
• May help extend the working life of a compatible clipper.
• Designed to match the corresponding WAHL internal connection system.

Installation Guidance

1. Confirm that the replacement lead is compatible with the complete model and type numbers printed on the clipper.
2. Disconnect the clipper from the mains supply before inspection or repair.
3. Do not begin installation unless trained and competent to repair mains-powered electrical appliances.
4. Open the clipper housing only according to the manufacturer's service instructions.
5. Record the original wire positions, cable routing and strain-relief arrangement before removing the old lead.
6. Remove the damaged lead without damaging the terminals, housing, motor or internal wiring.
7. Install the replacement cable using the correct internal connections and approved termination method.
8. Secure the strain relief correctly so movement of the external cable is not transferred to the electrical terminals.
9. Route the cable away from moving, sharp or hot internal components.
10. Reassemble the clipper carefully, ensuring that no wires are trapped or damaged by the housing.
11. Complete all required electrical safety inspections and tests before returning the clipper to service.
12. Do not use the appliance if the installation or electrical test results are unsatisfactory.

Cable Care

• Inspect the lead and plug before each working day.
• Keep the cable away from clipper blades and other sharp tools.
• Do not wrap the lead tightly around the clipper during storage.
• Avoid pulling the appliance by its cable.
• Disconnect the plug by holding the plug body rather than pulling the lead.
• Prevent the cable from becoming trapped under chairs, trolleys or heavy equipment.
• Store the lead in loose loops to reduce twisting and internal conductor damage.
• Remove the clipper from service immediately if the cable or plug becomes damaged.

Safety Information

• This is a mains-voltage electrical replacement component.
• Installation should be completed by a qualified electrical or appliance service technician.
• Always disconnect the appliance from the mains supply before opening the housing.
• Never work on a clipper while it is connected to a power outlet.
• Do not use the replacement lead unless it is confirmed as compatible with the exact clipper model.
• All terminals must be correctly connected and securely insulated.
• The original strain-relief arrangement must be restored correctly.
• Do not use the clipper if wires are exposed, trapped, loose or incorrectly routed.
• The repaired appliance must undergo appropriate electrical safety testing before use.
• Do not operate a clipper with a damaged lead, plug, housing or internal connection.
• Keep electrical equipment away from water and wet working areas.
• Keep the lead and repair components out of reach of children.

Please Note: This replacement lead is not universally compatible with every WAHL corded clipper. Plug type, cable entry, strain relief, terminal arrangement and internal wiring can vary between models, production dates and regional versions. Always confirm compatibility using the complete clipper model, type and original spare-part references before ordering. Professional installation and electrical safety testing are required.

Top Tip: Prevent premature cable damage by storing the lead in wide, loose loops. Avoid winding it tightly around the clipper, as repeated bending near the cable entry and plug can damage the internal conductors over time.