Description
Product Details
WAHL Replacement Blade for Magic Clip / Senior / Classic Fader
WAHL Replacement Precision Fade Blade is a professional adjustable clipper blade designed to restore sharp, reliable cutting performance to compatible WAHL Magic Clip, Senior and Classic Fader clippers. Its precision-ground teeth support controlled cutting, close fading and detailed blending techniques.
The blade provides an adjustable cutting range of approximately 0.7mm to 1.7mm when correctly fitted to a compatible clipper. It also offers zero-overlap adjustment capability for suitably trained professionals requiring closer fading and finishing performance.
Ideal for professional barbers, hairdressers and experienced clipper users, this replacement blade helps maintain the cutting performance of compatible professional WAHL clippers when the original blade becomes worn, damaged or less effective.
Cutting Length
- Approximately 0.7mm to 1.7mm.
- Zero-overlap capable when correctly adjusted by a trained professional.
Compatible Models
- WAHL 5 Star Magic Clip – compatible versions.
- WAHL 5 Star Cordless Senior – compatible versions.
- WAHL Classic Fader – compatible versions using the corresponding blade system.
Precision Fade Blade
The blade is designed to support professional fading and blending techniques. Its close adjustable cutting range allows barbers and stylists to create smooth transitions, remove visible weight lines and refine short cutting work.
Adjustable Cutting Range
When fitted to a compatible adjustable-blade clipper, the blade works with the taper lever to vary the cutting length between approximately 0.7mm and 1.7mm. This enables controlled length changes without immediately switching attachment combs.
Zero-Overlap Capability
The blade can be adjusted for zero-overlap performance by an experienced professional. Correct alignment is essential, as the moving cutter must never extend beyond the stationary blade. Incorrect adjustment may cause skin irritation, cuts or injury.
Key Features
- Genuine WAHL professional replacement clipper blade.
- Precision fade blade design.
- Designed for selected WAHL Magic Clip, Senior and Classic Fader clippers.
- Provides an approximate cutting range of 0.7mm to 1.7mm.
- Zero-overlap capable when professionally adjusted.
- Precision-ground teeth support sharp and accurate cutting.
- Ideal for close fading, tapering and blending.
- Helps restore consistent clipper performance.
- Suitable for use with compatible WAHL attachment combs.
- Designed for professional barbering and hairdressing use.
Benefits
- Helps restore the performance of a compatible professional clipper.
- Supports close, precise fading and blending.
- Adjustable cutting range provides excellent control.
- Helps create smoother transitions between short cutting lengths.
- Zero-overlap capability supports closer finishing work.
- Provides a practical replacement for a worn or damaged blade.
- Precision-ground construction supports consistent results.
- Regular cleaning and oiling can help preserve cutting performance.
Specifications
- Brand: WAHL.
- Product: Replacement Precision Fade Blade.
- Product Type: Professional Adjustable Clipper Blade.
- Blade Reference: 2191-style precision fade blade.
- Cutting Length: Approximately 0.7mm to 1.7mm.
- Adjustment: Taper lever adjustable.
- Zero-Overlap Capability: Yes, when correctly aligned.
- Application: Close cutting, fading, tapering and blending.
- Compatibility: Selected WAHL Magic Clip, Senior and Classic Fader models.
- Suitable for professional salon, barbering and training use.
What Is Included
- 1 x WAHL professional replacement blade set.
- Blade oil.
- Blade mounting screws.
- Fitting instructions.
Ideal For
- Professional barbers.
- Hairdressers and stylists.
- Experienced barbering students.
- Professional grooming specialists.
- Close fading and tapering.
- Removing visible weight lines.
- Detailed blending work.
- Replacing worn or damaged clipper blades.
- Maintaining compatible WAHL Magic Clip and Senior clippers.
- Maintaining compatible WAHL Classic Fader clippers.
Why Choose WAHL Replacement Precision Fade Blade?
- Genuine professional replacement component from WAHL.
- Designed for precision fading and blending.
- Provides a close 0.7mm to 1.7mm cutting range.
- Zero-overlap capable for advanced professional techniques.
- Precision-ground to support sharpness and durability.
- Helps restore smooth and reliable clipper performance.
- Suitable for busy professional barbering environments.
- Supplied with essential blade fitting and maintenance accessories.
Fitting Instructions
- Confirm compatibility with the complete model and type numbers printed on the clipper before fitting the blade.
- Switch off and disconnect the clipper from the mains or charger.
- Follow the blade replacement instructions supplied with the clipper and replacement blade.
- Use the appropriate tool to loosen and remove the blade mounting screws.
- Carefully remove the existing blade components, noting their position and orientation.
- Brush loose hair and debris from the blade mounting area.
- Position the replacement blade correctly and refit the screws loosely.
- Align the moving cutter and stationary blade according to WAHL's instructions.
- Ensure the moving cutter does not extend beyond the front or side edges of the stationary blade.
- Check that the blade is straight and evenly positioned before tightening the screws securely.
- Apply a few drops of WAHL blade oil across the cutting teeth.
- Operate the clipper briefly and check for smooth movement, unusual noise, pulling or excessive vibration.
Zero-Overlap Adjustment
- Only attempt zero-overlap adjustment if trained and confident in professional blade alignment.
- Disconnect the clipper before loosening or repositioning the blade.
- Move the stationary blade carefully towards the moving cutter while maintaining correct side-to-side alignment.
- Keep the moving cutter fractionally behind the stationary blade across its full width.
- Tighten the screws and inspect the alignment from the front and both sides.
- Test the clipper carefully before applying the blade to a client's skin.
Cleaning and Maintenance
- Brush loose hair from the blade after each use.
- Clean and disinfect the blade between clients using a suitable professional blade hygiene product.
- Allow the blade to dry before applying lubricant.
- Apply WAHL blade oil regularly and after cleaning.
- Operate the clipper briefly to distribute the oil, then wipe away any excess.
- Check the blade alignment and mounting screws regularly.
- Do not use the blade if teeth are bent, chipped, broken or corroded.
- Store the clipper and blade in a clean, dry location.
Safety Information
- Confirm compatibility before purchasing or installing the blade.
- Disconnect the clipper from its power supply before blade removal, fitting or adjustment.
- Handle the cutting teeth carefully, as the blade edges are sharp.
- Ensure the blade is correctly aligned before operating the clipper.
- Never allow the moving cutter to extend beyond the stationary blade.
- Incorrect zero-overlap adjustment may cause cuts, irritation or injury.
- Do not use a blade with missing, chipped, bent or damaged teeth.
- Test the clipper carefully after installation and before using it on a client.
- Stop using the appliance if the blade pulls hair, becomes excessively hot or produces unusual noise.
- Installation and zero-overlap adjustment should be completed by a competent professional.
- Keep the blade, oil and mounting components out of reach of children.
Please Note: Compatibility may vary between corded, cordless, regional and updated versions of the WAHL Magic Clip, Senior and Classic Fader. The current WAHL 2191 blade is officially specified for compatible 5 Star Magic Clip and 5 Star Cordless Senior models. Always compare the original blade reference, mounting system and complete appliance model number before ordering for a Classic Fader or another clipper.
Top Tip: After fitting and aligning the blade, apply three small drops of WAHL blade oil across the left, centre and right sections of the cutting teeth. Run the clipper briefly, wipe away any excess and test the blade on the forearm before beginning close professional cutting.
Reviews
There are no reviews yet.